Instructions for using Sorba-Freeze Refrigerant Pads
Easy to use - 4 simple steps

One of the main advantages of Sorba-Freeze is that it is extremely safe and easy to handle. All you need is water and a freezer.

1. If you have purchased a roll, tear off exactly what you need.
2. Soak the dry Sorba-Freeze pads for 10 minutes in fresh water
3. Freeze the swollen pads as low as minus 40°C
   If freezing more than one pad, place plastic film or waxed paper between layers of Sorba-Freeze and always stack them silver laminate to fabric. (Remove plastic film before use.)
   Do not place on bare metal until frozen
4. Pack the frozen pads above your product (fabric side down), as cold sinks downwards. To keep cold for longer periods place another Sorba-Freeze pack under your product.

CAUTION: Freezing pads below minus 15°C may burn uncovered skin.

For maximum insulation we recommend:

1. To completely insulate the pack, we recommend that you use an Insupak box which seals totally enclosing your product and the Sorba- Freeze pads.
2. Seal the pack with tape to make sure it stays closed throughout the journey.
3. For longer transit time, place an additional refrigerant sheet underneath as well as on top of your products.

NB:
The above points are the ideal steps for maximum effect and should keep your product well under 5°C for as long as 48 hours.